Push the key into the hole just below the slot in the female connector, then slide the cable ends apart. To remove the cutter, use the RCK-10 for 7/8' sections or the #CW Coupling Wrench for the 1-1/4' sections. For the sectional cables, slide the slot on the cutter over the tab on the female connector until the spring pin pops into place. Slide the cutter in the slot, then replace the lock washer and connecting screw and tighten the screw firmly. For machines using the Flexcor ® cables, first remove the screw and lock washer from the connector at the end of the cable. The sectional cables use a unique interlocking system in which the cable and cutter have connecting ends.īefore attaching any cutter, first unplug the machine. 'How do these cutter heads attach to the cable, and how do I change them?'Ī.The cutter heads for Flexicor ® cables connect using a screw and lock nut.
ADA Compliant & Independent Living Aids.
